-
- Some services are not accessible on smartphone
- Open a session
- My Account
- My Cart
- Quick Order
- Order / Invoice Tracking
- Customer Service
- Home
-
Products
- Cable Railing Hardware
- Steel Cable, Wire Rope, Guystrand
- Hooks & Snaps
-
Garage Door Hardware
Garage Door Hardware
- Garage Door Hinges
- Garage Door Rollers
- Garage Door Operator Brackets
- Garage Door Lubricants
- Garage Door Threshold
- Garage Door Lift Handles
- Garage Door Chain Hoists
- Garage Door Extension Cables
- Garage Door Locks
- Garage Door Rodent Control
- Garage Door Sheaves & Forks
- Garage Door Torsion Cables
- Garage Door Top & Bottom Brackets
- Garage Door Cones & Drums
- Extension Cords
- Garage Door Weatherseal
- Lubricants & Cleaners
-
Steel Chain
Steel Chain
- Grade 30 Zinc Plated Proof Coil Chain
- Grade 30 Hot Galv Proof Coil Chain
- Grade 43 High Test Steel Chain
- Grade 70 Transport Steel Chain
- Grade 80 Alloy Steel Chain
- Stainless Steel Chain Type 316
- Straight Link Zinc Plated Steel Chain
- Double Loop Chain
- Sash Chain
- Single Jack Chain
- Load Binders
- Binder Chains
- Shackles
- SlipIt Lubricants
- Steel & Polyester Slings
- Tools
- Turnbuckles
- Eyebolts
- Cable & Rope Fittings
- Hand Cleaning
- Fasteners
- Connecting Hardware
- Guying & Anchoring
- Hops Hardware
- Stage Rigging Hardware
- Boat Lift & Dock Hardware
- Blocks & Pulleys
- Winches
- Inventory Closeout
- Contact us
- My account
- Home>
- Products>
- Rigging Hardware>
- Wire Rope Clips>
- 3 / 8 Double Saddle Grip Forged Wire Rope Clip Galvanized
Double Saddle clips are galvanized to resist corrosion. Their design allows for quick installation and disassembly. They cannot be installed incorrectly and cause less damage to wire rope. Fewer clips are required per splice compared to U-Bolt clips.
Meets the performance requirements of Federal Specification FF-C-450 Type III, Class 1.
Trade Size | Min. No. of Clips per Eye | Amount of Rope to Turn Back | Required Torque Ft. Lbs. |
1/4" | 2 | 4 inches | 30 |
5/16" | 2 | 5 inches | 30 |
3/8" | 2 | 5-1/4 inches | 45 |
1/2" | 3 | 11 inches | 65 |
Not for overhead lifting
Match the same size clip to the same size wire rope.
Do not use on plastic coated wire rope.
The efficiency rating of a properly prepared termination for clips sizes 3/16" through 7/8" is 80% when torqued to the required ft. lbs. For 1" through 1-1/2" 90% when torqued to the required ft. lbs. This rating is based on the breaking strength of the wire rope or cable.
Apply first load to test the assembly. This load should be of equal or greater weight than loads expected while in use. Then check and retighten nuts to recommended torque.