Connect here
-
- Some services are not accessible on smartphone
- Open a session
- My Account
- My Cart
- Quick Order
- Order / Invoice Tracking
- Customer Service
- Home
-
Products
- Cable Railing Hardware
- Steel Cable, Wire Rope, Guystrand
- Hooks & Snaps
-
Garage Door Hardware
Garage Door Hardware
- Garage Door Hinges
- Garage Door Rollers
- Garage Door Operator Brackets
- Garage Door Lubricants
- Garage Door Threshold
- Garage Door Lift Handles
- Garage Door Chain Hoists
- Garage Door Extension Cables
- Garage Door Locks
- Garage Door Rodent Control
- Garage Door Sheaves & Forks
- Garage Door Torsion Cables
- Garage Door Top & Bottom Brackets
- Garage Door Cones & Drums
- Extension Cords
- Garage Door Weatherseal
- Lubricants & Cleaners
-
Steel Chain
Steel Chain
- Grade 30 Zinc Plated Proof Coil Chain
- Grade 30 Hot Galv Proof Coil Chain
- Grade 43 High Test Steel Chain
- Grade 70 Transport Steel Chain
- Grade 80 Alloy Steel Chain
- Stainless Steel Chain Type 316
- Straight Link Zinc Plated Steel Chain
- Double Loop Chain
- Sash Chain
- Single Jack Chain
- Load Binders
- Binder Chains
- Shackles
- SlipIt Lubricants
- Steel & Polyester Slings
- Tools
- Turnbuckles
- Eyebolts
- Cable & Rope Fittings
- Hand Cleaning
- Fasteners
- Connecting Hardware
- Guying & Anchoring
- Hops Hardware
- Stage Rigging Hardware
- Boat Lift & Dock Hardware
- Blocks & Pulleys
- Winches
- Inventory Closeout
- Contact us
- My account
- Home>
- Endurance Products>
- Hops Hardware>
- Galvanized No-Wrench Earth Anchors>
- 66" Earth Anchor w / 8" Helix, 1" Rod, HG
66" Earth Anchor w / 8" Helix, 1" Rod, HG
Product Code:HELIX8-66
Professional Grade Earth Anchor
- Helix OD: 8"
- Length: 66"
- Rod Diameter: 1"
- Finish: Galvanized to ASTM A153, Class C
- Typical Working Torque 1" rod: 1,000 ft-lbs.
- Weight: 19 lbs.
- Ships Common Carrier only, not eligible for $250 Free Freight.
Approx. Holding Capacities (see Soil Classifications):
Class 5: 11,000 lbs.
Class 6: 9,000 lbs.
Class 7: 6,000 lbs.
Heavy Duty Earth Anchors may be used to attach guy wires for securing structures such as metal buildings, small towers, docks; for anchoring erosion control barriers as well as for many other applications. Anchors are installed by turning the anchor into the ground, utilizing a turning bar placed through the anchor's forged eye. No Wrench Utility Anchors can be installed by hand or by machine. Anchors have a forged triple eye, heavy duty helix welded on both sides and an angled point to ease installation.
Anchors are hot dipped galvanized to meet ASTM Specification A153, Class C Grade 80 coating for maximum corrosion resistance.
Soil Classifications:
Class 5: Medium dense coarse sand and sandy gravels; stiff to very stiff silts and clays Saprolites, residual soils.
Class 6: Loose to medium dense fine to coarse sands; stiff clays and silts; dense hydraulic fills; compacted fills; residual soils.
Class 7: Loose fine sands; Alluvium; loess; stiff & varied clays; flood plain soils; lake clays; adobe; gumbo; fill.
Anchor requirements are site specific. Soil type should be determined to assure that the correct anchors are used. Seek professional guidance. Anchors must be installed in the direction of the guy load. Failure to install within 5 degrees of alignment of the guy load will significantly lower strength. Capacity ratings apply to properly installed anchors only.
SAFETY FIRST: Call 811 before digging. Underground utility lines are marked for free. For more information visit: www.digsafe.com
Anchors are hot dipped galvanized to meet ASTM Specification A153, Class C Grade 80 coating for maximum corrosion resistance.
Soil Classifications:
Class 5: Medium dense coarse sand and sandy gravels; stiff to very stiff silts and clays Saprolites, residual soils.
Class 6: Loose to medium dense fine to coarse sands; stiff clays and silts; dense hydraulic fills; compacted fills; residual soils.
Class 7: Loose fine sands; Alluvium; loess; stiff & varied clays; flood plain soils; lake clays; adobe; gumbo; fill.
Anchor requirements are site specific. Soil type should be determined to assure that the correct anchors are used. Seek professional guidance. Anchors must be installed in the direction of the guy load. Failure to install within 5 degrees of alignment of the guy load will significantly lower strength. Capacity ratings apply to properly installed anchors only.
SAFETY FIRST: Call 811 before digging. Underground utility lines are marked for free. For more information visit: www.digsafe.com
Holding strengths are based on approximate industry standards. Determining soil load capacity is an inexact science limited by changing moisture content, soil compaction, root penetration, installation method, pullout load angle, attachment angle and other factors. It is recommended to do on-site probing and torque testing. When in doubt seek professional guidance.
SAFETY FIRST: Call 811 before digging. Underground utility lines are marked for free. For more information visit: www.digsafe.com
SAFETY FIRST: Call 811 before digging. Underground utility lines are marked for free. For more information visit: www.digsafe.com